Help Guide
MULTI CHANNEL AV RECEIVER
STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES
System requirements for a wired LAN connection
The following system environment is required to use the network function of the receiver via a wired LAN connection.
Router
Use a router compatible with transmission speeds of 100 Mbps or greater.
We recommend that you use a router equipped with a built-in DHCP (Dynamic Host Configuration Protocol) server
because the default setting on the receiver is DHCP.
This function automatically assigns IP addresses to devices on the LAN.
LAN cable
We recommend using a normal shielded type cable for a wired LAN to avoid electric noise.
Some flat-type LAN cables are easily affected by noise.
We recommend using a Category 7 cable.
4-686-529-11(5) Copyright 2017 Sony Corporation
95