Installing Expansion Blades In The 9.5" Base And; Figure 3-34 Installing Reinforcement Bracket - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

System Hardware Manual

Using two screws, secure the Base and Expansion chassis

together with the metal reinforcement bracket provided.

Installing Expansion Blades in the 9.5" Base and Expansion Chassis

When adding additional chassis to the system to expand the

capacity, a PZ-BS10 must be installed in the Controlling Chassis and

a PZ-BS11 must be installed in all Expansion Chassis. This

connection is required with any multiple-chassis setup.

The PZ-BS10 connects the Controlling Chassis to the Expansion

Chassis by connecting to a PZ-BS11, which is installed on each

Expansion Chassis. These Expansion Interface Units allow the CPU

to transmit/receive data as required to the additional chassis.

The PZ-BS10 is installed in the Expansion bay of the Controlling

Chassis which is equipped with a CPU blade. The PZ-BS11 is

installed in the Expansion bay of the Expansion Chassis, which does

not have a CPU.