NETGEAR Arlo Quick Start Manual page 6

A blue LED on the camera blinks rapidly to confirm sync.
The camera is ready for viewing.
Note:
The LED blinks amber if the sync is not successful. You must
repeat the sync process.
You're Done!
Congratulations! Your Arlo camera is set up and ready to go. To view
useful tutorial videos, find troubleshooting tips, or get support, visit
http://support.arlo.com.
10
Sync Your Camera
with a Nighthawk Router
Check to make sure that your Nighthawk router is connected to the
Internet. For more information, see the Quick Start guide that came
with your router.
Check to make sure that your Nighthawk router firmware has Arlo
capability.
1. Launch a web browser from a computer or wireless device that is
connected to the router's network.
2. Type http://www.routerlogin.net.
11