NEC UNIVERGE SV8300 Command Manual page 514

COMMAND CODE TITLE:
67
Y
No. MEANING
03 Echo Canceller
between locations
NOTE:
This data setting is valid to the location that is set to "XX" in the first data.
04 Minimum value of
jitter buffer
between locations
NOTE 1: When setting this data to other than default, set CM67 YY=05 to other than default.
NOTE 2:
Assign the value which does not exceed the maximum value of jitter buffer set by CM67 Y=05.
NOTE 3: When this data is set to other than NONE, assign CM67 Y=05 to other than NONE to be effective for
this data.
NOTE 4: Jitter buffer of PZ-64IPLC-A/PZ-128IPLC-A (VoIPDB) is controlled as 200 ms., when minimum val-
ue of jitter buffer is set more than 210 ms.
NOTE 5:
This data setting is valid to the location that is set to "XX" in the first data.
05 Maximum value of
jitter buffer
between locations
NOTE 1: When setting this data to other than default, set CM67 YY=04 to other than default.
NOTE 2: Assign the value which exceeds the minimum value of jitter buffer set by CM67 Y=04.
NOTE 3: When this data is set to other than NONE, assign CM67 Y=04 to other than NONE to be effective for
this data.
NOTE 4: This data setting is valid to the location that is set to "XX" in the first data.
LOCATION DATA ASSIGNMENT
1ST DATA
DATA MEANING
XX ZZ XX: Location
number
(00-63)
ZZ : Location
number
(00-63)
XX ZZ XX: Location
number
(00-63)
ZZ : Location
number
(00-63)
XX ZZ XX: Location
number
(00-63)
ZZ : Location
number
(00-63)
2ND DATA
DATA MEANING
00 Echo Canceller OFF
01 Echo Canceller ON
NONE Echo Canceller ON
CCC Clear
01 10 ms.
30 300 ms.
(10 ms. increments)
NONE 10 ms.
CCC Clear
01 10 ms.
30 300 ms.
(10 ms. increments)
NONE 300 ms.
CCC Clear
3-458
CM67
: Default
RELATED
COMMAND
CM12 Y=39/50
CM8A Y=5000-
5255: 173
CM12 Y=39/50
CM8A Y=5000-
5255: 173
CMAD Y=29
CM12 Y=39/50
CM8A Y=5000-
5255: 173
CMAD Y=29
Continued on next page
NWA-033623-001 Rev.8.1
91ch3005.fm
JANUARY/31/2012