UNIT SELECT PLUG
When inserted, the unit select pI ug determines the physical identifier number
(1-32) transmitted by command to the mass storage processor. When the plug is
removed, the number zero is transmitted.
Note: The uncoded unit select plug supplied with each unit must be encoded
by Honeywell Customer Services during installation. Once encoded, the
number of the plug may not be changed. Additional uncoded plug kits are
available as an accessory. Plugs may be interchanged among units.
START/STOP
GIGEJB 0
Figure 2-1. MSU040210451 ControlPanel
Controls and Indicators
2-2
AT71-03