Specifications - Makita BFL060F Instruction Manual

ENGLISH
1-1. Battery cartridge
2-1. Battery cartridge
3-1. Switch trigger
4-1. Reversing switch lever
5-1. Light
5-2. LED indicator
7-1. Angle head
7-2. Adjusting ring

SPECIFICATIONS

Model
Hard joint
Fastening
torque
Soft joint
Square drive
-1
No load speed (min
Dimensions
Net weight
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is not more
than 70 dB (A).
The noise level under working may exceed 85 dB (A).
Wear ear protection.
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
Model; BFL060F,BFL080F,BFL081F,BFL120F,
BFL121F,BFL200F
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN50260, EN55014
Directives, 89/336/EEC, 98/37/EC.
Yasuhiko Kanzaki CE2005
000087
Explanation of general view
7-3. Ring
7-4. Scale
7-5. Adjusting grip
7-6. Hole for Adjusting grip
7-7. Edge of Adjusting ring
7-8. Compression spring
8-1. Socket
8-2. Hole
BFL060F
1.5 - 6 N • m
1.5 - 6 N • m
9.5 mm
) 450
430 x 65 x 74 mm (With Battery Cartridge BH9020A)
454 x 65 x 74 mm (With Battery Cartridge BH9033A)
1.5 kg (With Battery Cartridge BH9020A)
1.7 kg (With Battery Cartridge BH9033A)
2
.
in accordance with Council
BFL080F BFL120F
2 - 8 N • m 5 - 12 N • m
2 - 7.5 N • m 5 - 12 N • m
9.5 mm 9.5 mm
450 250
D.C. 9.6 V
ENE033-1
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
ENG001-1
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan
IMPORTANT SAFETY
INSTRUCTIONS FOR CHARGER
& BATTERY CARTRIDGE
1. SAVE THESE INSTRUCTIONS- This manual
ENH002-4
contains important safety and operating
instructions for battery charger.
2. Before
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
3. CAUTION - To reduce risk of injury, charge
only MAKITA type rechargeable batteries.
Other types of batteries may burst causing
personal injury and damage.
4. Do not expose charger to rain or snow.
5. Use of an attachment not recommended or
sold by the battery charger manufacturer may
3
8-3. Pin
9-1. Screw bit
9-2. Sleeve
10-1. Limit mark
11-1. Screwdriver
11-2. Brush holder cap
BFL081F BFL121F
2 - 8 N • m 5 - 12 N • m
2 - 7.5 N • m 5 - 11.5 N • m
9.5 mm 9.5 mm
700 410
430 x 71 x 92 mm (With Battery Cartridge BH1220)
413 X 74 X 92 mm (With Battery Cartridge BH1220C)
454 x 71 x 92 mm (With Battery Cartridge BH1233)
421 x 74 x 107 mm (With Battery Cartridge BH1233C)
1.7 kg (With Battery Cartridge BH1220)
1.6 kg (With Battery Cartridge BH1220C)
2.0 kg (With Battery Cartridge BH1233)
1.9 kg (With Battery Cartridge BH1233C)
D.C. 12 V
Director
using battery charger,
BFL200F
8 - 20 N • m
8 - 18 N • m
9.5 mm
220
ENC002-3
read all