Intended use of machinery or curves. TASKI swingo 150 is a scrubber dryer that is designed for commercial use (for example, in hotels, schools, hospitals, factories, shopping centres, offices, etc.). The machine may only be used by persons who have been...
Trademark: Noise emission and vibrations: TASKI machines and units have been designed so that any danger to health through the noise emitted or through vibrations can be excluded according to the current state of knowledge. Refer to the technical information on page 33.
Overview 16 17 18 Handle Front bumper Water pump switch (illuminated) Nozzle body Suction motor switch (non-illuminated) Wheels Main switch Foot pedal Transport handle, front Suction hose Tank unlocking device Transport handle, rear Filter housing Hose connection Dosing lid Power supply cord Solution tank Cable hook Recovery tank...
• Screw the dosing lid back into the cutout provided. Ensure that the dosing lid is screwed in exactly as shown in the illustration. The Taski lettering must be below. Only in this way will the ribs on the dosing lid fit into the cutouts provided in the tank.
• Press the suction switch (1) to turn the suction • Empty the soiled solution from the tank through unit on (no lamp) the opening provided on the rear side of the • Press the water pump switch (2) to turn the tank.
Page 8
Cleaning the sponge and pump protection filter • Replace the squeegee in the squeegge body. Note that the front and rear squeegees are • Remove the light-blue sponge filter using different. The position is shown on the upper side of the squeegee (FRONT + REAR). pincers.
You can find this information on the name plate of your machine, and the wheels with a damp cloth. address of your nearest TASKI partner can be found on the last page of this The transport wheels can become soiled by manual.
Page 10
Dimensions of the machine Dimensions in centimetres! swingo 150...