Assembly - Breville Handy Mix & Store LHM150 Instruction Book

Assembly

BEFORE FIRST USE
Remove any packaging material and
promotional labels.
When unpacking the hand mixer, check to see
you have received all the required parts before
discarding the packaging.
Hold the storage case with one hand whilst
holding the mixer body by the handle with the
other hand; pull the mixer body away from the
storage case to remove.
Remove the beaters and dough hooks from
inside the storage case.
Wash the beaters, dough hooks, storage case in
warm soapy water with a soft cloth. Rinse and
dry thoroughly.
Wipe the mixer body with a damp cloth and
dry.
WARNING
Never immerse the mixer, power cord or plug
in water or any other liquid.
NOTE
When first using the hand mixer you may
notice an odour from the motor. This is normal
and will dissipate as the motor is run in.
ASSEMBLY OF THE BEATERS
WARNING
Ensure the hand mixer is switched off and
unplugged from the power outlet before
attaching the beaters to the mixer.
WARNING
Beaters must be inserted into the correct
sockets as they are not interchangeable.
Incorrect insertion will result in the beaters
falling out during operation and cause damage.
1. Insert the left beater shaft into the left
attachment socket under the mixer motor
body.
2. Firmly push the beater into the socket
until it locks into place. Repeat for the right
beater into the right attachment socket.
Left
Right
NOTE
Always ensure the beaters are firmly
positioned before operating.
9