Maintenance Printing; Print Maintenance Data And Frame Pattern - Brother HL-L2300D Service Manual

1.4.12 Maintenance printing

This function is used to print maintenance information, such as the remaining amount of
consumables, the number of replacements, and counter information. (The same function as
that described in
<Operating Procedure>
(1) Open the front cover while the power switch is turned OFF.
(2) Press and hold the [Go] key, and turn ON the power switch. The Toner, Drum, and Paper
LEDs light.
(3) Release the [Go] key. All LEDs go out.
(4) Press the [Go] key twice. The Toner, Drum, and Paper LEDs light.
(5) Press the [Go] key and close the front cover. Toner, Drum, and Paper LEDs go out in a
second and the maintenance printing starts.

1.4.13 Print maintenance data and frame pattern

This function is used to print maintenance data on the first side and print the frame pattern on
the second side in duplex printing mode. Short Bind is automatically applied to duplex
printing in this mode. When printing is completed, the setting applied prior to Short Bind is
restored.
<Operating Procedure>
(1) Open the front cover while the power switch is turned OFF.
(2) Press and hold the [Go] key, and turn ON the power switch. The Toner, Drum, and Paper
LEDs light.
(3) Release the [Go] key. All LEDs go out.
(4) Press the [Go] key twice. The Toner, Drum, and Paper LEDs light.
(5) Press the [Go] key twice and close the front cover. Toner, Drum, and Paper LEDs go out
in a second and the maintenance and frame pattern printing starts.
"1.3.16 Print maintenance information (function code: 77)"
5-40
for LCD models)
Confidential