Samsung ML-5000A Service Manual page 20

Disassembly and Reassembly
3. Locate the SIMM connector on the control board.
4. Hold the SIMM with the connection points and
insert the SIMM all the way into the connector at
30 o angle .
3-12
5. Push it firmly until it snaps into place.
Make sure both metal clips on the connector are
fastened and the two pins on the connector are
pushed through the holes on the SIMM.
Note: When you disassemble the SIMM, push
out on the metal clips at each end of the
connector and pull it toward you.
6. Reassemble the shield cover.
Samsung Electronics