Basic Operations; Selecting The Component; Receiving Broadcasts - Sony STR-LV500 Operating Instructions Manual

Basic Operations

Selecting the component

1
Press INPUT SELECTOR repeatedly to
select the input.
The selected input appears in the display.
To select the
DVD player
VCR
Hard disc or MD deck
Satellite tuner
Built-in tuner (FM)
Built-in tuner (AM)
2
Turn on the component and start
playback.
3
Rotate VOLUME to adjust the volume.
To mute the sound
Press MUTING to mute the sound. MUTING
appears on the display when the sound is muted.
To cancel muting, press it again or turn up the
volume.
GB
12
Display
DVD
VIDEO
HDD/MD
TV/SAT
Tuner (FM)
Tuner (AM)

Receiving broadcasts

Before receiving broadcasts, make sure you
have connected FM and AM antennas to the
receiver (page 7).
Use the remote for the tuner operation.
Automatic tuning
If you don't know the frequency of the station
you want, you can let the receiver scan all
available stations in your area.
1
Press FM or AM repeatedly to select FM
or AM band.
You can also use INPUT SELECTOR on
the system. The last received station is
tuned in.
2
Press TUNING MODE repeatedly to
select "AUTO T.".
3
Press TUNING + or TUNING –.
Press TUNING + to scan from low to high;
press TUNING – to scan from high to low.
The receiver stops scanning whenever a
station is received.
When the receiver reaches either end
of the band
Scanning is repeated in the same direction.
4
To continue scanning, press TUNING +
or TUNING – again.
Manual tuning
You can tune in the station in 50 kHz steps for
FM band and 9 kHz steps for AM band.
1
Press FM or AM repeatedly to select FM
or AM band.
You can also use INPUT SELECTOR on
the system. The last received station is
tuned in.
2
Press TUNING MODE repeatedly to
select "MANUAL T.".
3
Press TUNING + or TUNING –
repeatedly to tune in the station you
want.