Sony 4-144-907-43(1) Operating Instructions Manual page 98

About the indicators on the display window
COAX OPT
SW
LFE
MULTI IN
L C R HDMI
SL S SR
SB L SB SB R
Name Function
A SW
Lights up when subwoofer is
connected and the audio signal
is output from the
SUBWOOFER jack. While
this indicator lights up, the
receiver creates a subwoofer
signal based on the LFE signal
in the disc being played back or
the low frequency components
of the front channels.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C COAX
Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the COAXIAL
jack.
D OPT
Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the OPTICAL
jack.
GB
98
D + EX TrueHD Neural THX DTS
DTS - HD MSTR HI RES
DMPORT ANALOG LPCM
- - ES 96 24 / D.RANGE
NEO:6 PL ll
X
EQ - Bl AMP
Name
E ; D/
; D EX/
; D+/
; TrueHD
F Neural - THX Lights up when the receiver
G DTS/
DTS-ES/
DTS 96/24
H D.RANGE
SP A B
+
MEM MONO RDS ST ZONE 2 3
A.DIRECT
Function
"; D" lights up when the
receiver is decoding Dolby
Digital signals.
"; D EX" lights up when the
receiver is decoding Dolby
Digital Surround EX signals.
"; D+" lights up when the
receiver is decoding Dolby
Digital Plus signals.
"; TrueHD" lights up when
the receiver is decoding Dolby
TrueHD signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set
to "AUTO" (page 93).
applies Neural - THX
processing to input signals.
"DTS" lights up when the
receiver is decoding DTS
signals.
"DTS-ES" lights up when the
receiver is decoding DTS-ES
signals.
"DTS 96/24" lights up when
the receiver is decoding DTS
96 kHz/24 bit signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is set to
"AUTO" (page 93).
Lights up when dynamic range
compression is activated.
SLEEP