Periodic Inspection And Maintenance; Cleaning; About The Data Backup Capacitor - Sony MKE-9020M Installation Manual

Dme processor pack, multi format dme processor
Hide thumbs Also See for MKE-9020M:
Table of Contents

Advertisement

2-2. Periodic Inspection and Maintenance

2-2-1. Cleaning

Front panel
The filter on the rear of the front panel can easily accumulate
the dust. Be sure to remove dust by cleaning as follows.
1. Remove the front panel. (Refer to Section 1-4-1.)
2. Remove the dust accumulated on the filter with a
vacuum cleaner.
n
Cleaning the filter by washing in water is recommend-
ed when there is a heavy accumulation of dust.
Be sure to dry the filter completely after it has been
washed.
Front panel
Filter
Fan
If dust has accumulated in the intake of the fan, air is
prevented from flowing smoothly and this may result in a
temperature rise inside the machine. This may have an
adverse effect on performance and the life of the machine.
Cleaning of the fan every month is recommended.
Contact your local Sony Sales Office/Service Center for
information on cleaning the fan.
Fan
2-2

2-3. About the Data Backup Capacitor

A large capacitor is installed on the CA-54CFA board in
order to backup the memory storing the setup and other
data in the MVE-9000. Leave the main power of the MVE-
9000 turned on for an hour or longer in order to charge this
capacitor. The data is backed up for about a week when the
capacitor is fully charged under normal operating tempera-
ture.
Fan
MVE-9000 IM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mve-9000Mve-9000-cHk-psu04Mke-9021mMke-9040m

Table of Contents