Power Saving Detailed Setting (Outdoor Unit Capacity Control) - Hitachi PC-ARF1 Operation Manual

(2) Select "Power Saving Mode Setting" by
pressing " " or " " and press "OK".
The "Power Saving Mode Setting" screen
will be displayed.
Menu
OK
Back/Help
Menu
OK
Back/Help
(3) By pressing " "or "
Mode Setting" will change between:
Capacity Control ↔ Rotation Control ↔
Intermittent Control ↔ No Setting
Select "Power Saving Mode" and press "OK".
The setting confirmation screen will display.
Menu
OK
Back/Help
Menu
OK
Back/Help
(4) Select "Yes" using " "or " " and press "OK".
The screen will return to normal mode.
Menu
OK
Back/Help
Menu
OK
Back/Help
14
Power Saving Setting
Power Saving Mode Setting
Detailed Setting
Sel. OK Entr Back Rtrn
", "Power Saving
Power Saving Mode Setting
Sav Mode
Capacity Cntl
Control cooling/heating capacity of
outdoor unit.
Adj. Entr Rtrn
OK Back
Power Saving Mode Setting
Fix power saving settings.
Cancel current power saving
settings?
Yes No
Sel. OK Entr Back Rtrn
8.6.1 Power Saving Detailed Setting
(Outdoor Unit Capacity Control)
This function is used to set the detail of the
outdoor unit capacity control.
• Depending on the type and setting of the indoor
unit and outdoor unit it may be impossible to
set this function.
• Control Method:
The "Peak Cut Control" reduces the power
consumption range when it exceeds the
value of the power setting. On the basis of
the current air conditioning capacity, the
"Moderate Control" is used to moderate the air
conditioning capacity as well as the peak.
• Power Saving LOW (MED / HIGH):
Assign a value corresponding to the capacity
control of each level of the power saving
LOW / MED / HIGH.
• Change Level:
It is possible to change the power saving level
from the power saving guidance.
NOTE:
• The "Main/Sub-Remote" display in "Current
Setting" of the "Help Menu" cannot be set if the
indication is "Sub" or "−−".
• If the power saving mode change the power
saving detailed setting in the outdoor unit
capacity control, the "Power Saving ON/OFF"
will be OFF.
• It is necessary to assign a value of capacity
control as follows:
"Sav LOW" > "Sav MED" > "Sav HIGH".
• The cooling/heating capacity can decrease
when using the "Power Saving" function.
(1) Select "Power Saving Mode Setting" from
the "Menu" and press "OK".
The "Power Saving Setting" screen will be
displayed.
Menu
OK
Back/Help
Menu
OK
Back/Help
Menu 15:10(Fri)
Simple Timer
Reset Filter Sign Time
01
Operation Schedule
/
Elevating Grille 05
Power Saving Setting
Sel. Entr Rtrn
OK Back
P5417005