Honeywell Miller Falcon MP50G-LE User Instruction page 10


Operational damage to the hardware.
Snap Hook/Carabiner - The connector
gate (keeper) should seat into the nose
without binding and should not be distorted
or obstructed. The gate spring should exert
sufficient force to firmly close the gate. The
gate locking mechanism must prevent the gate
from opening when closed. It is permissable to
lubricate snap hooks and carabiners if needed.

Evidence of defects in or damage to the
housing and/or loose/missing fasteners.

Evidence of defects in or damage to
shock absorber pack including holes, tears,
deterioration, loose or broken stitching.

Evidence of deployed or activated fall load
indicators.
Falcon Edge Self-Retracting Lifelines are
equipped with a load indicator built into the
shock absorber pack. When subjected to
fall arrest forces the internal white energy
absorber will become exposed or deploy as
shown.
WARNING
When inspection
testing reveals defects in or damage to
equipment, inadequate maintenance of
equipment, or evidence of equipment
having been exposed to fall arrest forces
or loading, the equipment shall be
immediately removed from service.
Falcon Edge Self-Retracting Lifelines
are repairable devices. Units removed
from service, shall be marked and
tagged "UNUSABLE"
for service in accordance with the
manufacturer's instructions.
10
and operational
and returned
5.2 Maintenance
Basic care of all fall protection equipment
will prolong its service life and will contribute
toward the performance of its vital safety
function.
Servicing
Servicing of Honeywell Miller self-retracting
lifelines must only be carried out by Honeywell
Industrial Safety or persons or entities
authorized in writing by Honeywell. A record
log of all servicing and inspection dates for
this device must be maintained. Only original
Honeywell replacement parts are approved
for use in this device. Contact your Honeywell
distributor or call Honeywell Technical Service
at 1-800-873-5242 for a return authorization
number.
Honeywell Miller self-retracting lifelines
require no annual factory recertification.*
*Honeywell, as the manufacturer, does not
require annual factory recertification for
Honeywell Miller self-retracting lifelines.
Ultimately, however, the end-user/company
must ensure compliance with applicable
national and regional
regulations and may elect to follow additional
voluntary standards with regard to inspection
and recertification requirements.
Cleaning and Storage
This device must be kept clean and free of
contaminants. Periodically clean the exterior
of the device and wipe the lifeline using a
damp cloth and mild detergent.
When not in use, equipment shall be stored
in a manner as to preclude damage from
environmental factors, such as temperature,
light, UV, excessive moisture, oil, chemicals
and their vapors, or other degrading elements.
The lifeline should be fully retracted into
the device when not in use.
fall protection