Wall Mount Using Din Rail Brackets - Cisco 1000 ISR Series Installation And Connection

Install and Connect the Router
1

Wall Mount using DIN Rail Brackets

The router is shipped with DIN Rail brackets that are to be secured on the bottom side of the chassis. Your
chassis installation must allow unrestricted airflow for chassis cooling.
Note
Wall mount using DIN Rail brackets is applicable only for C111x.
To attach the DIN Rail brackets to the router chassis, use the PHMS screws and the plastic spacers provided for each
bracket.
Figure 16: DIN Rail Bracket Installation - C111x and C111X
1
2
Wall Mount using DIN Rail Brackets
Key-hole slots
Horizontal spacing: < >
Vertical spacing: < >
Screws
DIN Rail Brackets
Install and Connect the Router
15