How To Set An Ip Address For Each Port - Yamaha CL Series System Design Manual

5-2. How to set an IP address for each port

Each type of port has different way of setting its IP address, and certain ports allow automatic
assignment of IP addresses, while others require manual settings. Manual assignment of IP addresses
to the Dante port will require the use of Dante Controller software.
addresses to the Device Control port of R series devices will require the use of R Remote software.
Dante port
IP address 169.254.xx.yy
Device Control port
IP address: 169.254.xx.yy
Mixer Control port
IP address: 192.168.0.xxx
Below is a chart for illustrating different scopes of IP address, how they are configured and how easy
they are to manage. (Here, we recommend the default link-local addresses unless there is a specific
reason for choosing the others).
Set via
Dante Controller
Set via console
Set via console
11
Manual assignment of IP