Table of Contents
Advertisement
x When playing a DVD-RW
The types of sound tracks recorded on a disc
are displayed. The default setting is
underlined.
Example:
• 1: MAIN (main sound)
• 1: SUB (sub sound)
• 1: MAIN/SUB (Dual Mono)
Notes
• Not all discs give you the three choices above when
in Super Audio CD playback. It all depends on the
layer configuration of the Super Audio CD to be
played.
• When playing a Super Audio CD in the 2 channel
playback area or the 2 CHANNEL STEREO mode,
the POWER/ON LINE indicator of the surround
amplifier turns red.
4
Press ENTER.
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
Notes
• For discs not in multiple audio format, you cannot
change the sound.
• During DVD playback, the sound may change
automatically.
Tip
You can select [AUDIO] directly by pressing AUDIO.
Each time you press the button, the item changes.
Displaying the audio
information of the disc
(DVD VIDEO only)
When you select [AUDIO], the channels being
played are displayed on the screen.
For example, in Dolby Digital format, multiple
signals ranging from monaural to 5.1 channel
signals can be recorded on a DVD. Depending
on the DVD, the number of recorded channels
may differ.
DVD
1 2 ( 2 7 ) TITLE12
1 8 ( 3 4 )
T
1 : 3 2 : 5 5
1: ENGLISH
* [PCM], [MPEG], [DTS], or [DOLBY
DIGITAL] is displayed.
For [DOLBY DIGITAL], the channels in the
playing track are displayed numerically as
follows:
For Dolby Digital 5.1 ch:
Surround component 2
DOLBY DIGITAL 3 / 2 . 1
Front component 2 +
Center component 1
The display examples are as
follows:
• PCM (stereo)
PROGRAM FORMAT
PCM 48kHz 24bit
• Dolby Surround
PROGRAM FORMAT
DOLBY DIGITAL 2/0
DOLBY SURROUND
Current audio format*
DVD
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
LFE (Low Frequency
Effect) component 1
continued
63
GB
Hide quick links:
Advertisement
Table of Contents
