Step 1: Speaker System Hookup - Sony DAV-LF10 Operating Instructions Manual

Step 1: Speaker System Hookup

Connect the supplied speaker system using the supplied speaker cords by matching the colors of the
jacks to those of the cords. For the surround speakers connect them to the surround amplifier that
receives the sound by wireless. Do not connect any speakers other than those supplied with this system.
To obtain the best possible surround sound, specify the speaker parameters (distance, level, etc.) on
page 36.
Connecting the subwoofer
Connect the system connector of the control unit to the SYSTEM CONNECTOR jack of the
subwoofer.
To insert the plug of the SYSTEM CONNECTOR cord, press and hold both sides of the plug.
VIDEO
S VIDEO (DVD ONLY)
MONITOR OUTPUT
PHONES
DIR-R4
Notes
• Do not handle the clear plastic panel when you move or operate the control unit as it may break.
• Before connecting/disconnecting the SYSTEM CONNECTOR cord, make sure the AC power cord (mains lead) is
disconnected from the wall outlet (mains).
Required cords
Speaker cords
The connector and the color tube of the speaker cords are the same color as the label of the jacks to be
connected.
Subwoofer
COMPONENT VIDEO OUT ANTENNA
Y P /C P /C SCAN SELECT
B B R R
SELECTABLE INTERLACE
AM
VIDEO VIDEO DIR-T1
IN IN
FRONT R CENTER FRONT L
(FOR SS-TSL10 , SS-CTL10)
SPEAKER
AUDIO AUDIO FM
IN IN
75
COAXIAL
OPTICAL
DIGITAL IN
L L
R R
SYSTEM CONNECTOR
VIDEO SAT
FOR HCD-LF10
SYSTEM CONNECTOR cord
(–)
(+)
Control unit
(–)
(+)
color tube
continued
15 GB