Honeywell Notifier ID3000 Series Installation & Commissioning Manual page 72

ID3000 Series Installation & Commissioning Manual
A4 - 1
Appendix 4
ID net Intelligent Digital Delivery Network
2
1 Introduction
The ID net (Intelligent Digital Delivery network)
2
designed by NOTIFIER Fire Systems, is an
EN54-compliant, peer-to-peer network which
provides a flexible and cost-effective solution for
small, medium or large fire detection systems.
A number of advantages are offered over
'master/slave' network configurations:
•
A significant increase in the number of
panels capable of being networked
•
Very fast message transmission times
•
High system robustness
•
Comprehensive diagnostic tools.
The ID 2 net offers a wide range of network-wide,
menu-driven control functions, including
disablement, test and detailed status enquiry
that can be carried out at any panel on the
network. Other key features included are:
a. Up to 32 panels/100 nodes per network
capability
b. Single-fault tolerance using simultaneous,
bi-directional message transmission
c. Fast message transmission time
d. Short circuit, open circuit and earth fault
protection per link
e. Verified delivery with automatic re-try if
required
f. Message delivery using token passing -
avoids multiple collisions
g. Predictable network time performance
h. System diagnostics - including on-site
installation/debugging and full network
transmission analysis facilities
i. Use of fibre-optic cables supported.
The ID net is compatible with the following range
2
of NOTIFIER Fire Systems' fire control panels:
• ID3000 Series
1.1 Software Compatibility
The ID 2 net is compatible with ID3000 Series control
panels with software versions 4.00, or above.
1.1.1 Software Version
The panel, Loop PCB and ID
versions are displayed when performing a
Lamp Test. Refer to the ID3000 Series
Operating Manual (ref. 997-505-000-X).
net software
2
997-274-000-6, Issue 6
September 2009