Sony TRIMASTER HX BVM-HX310 Operating Instructions Manual page 33

Submenu Setting
Aspect Mode Sets the aspect ratio of area marker 1
when "Safe Area Marker" is selected in
"Area Marker1 Mode."
 16:9 (Default value)
 15:9
 14:9
 13:9
 4:3
 2.39:1
 2.35:1
 1.85:1
 1.66:1
1.896:1

 Variable
Note
When "Variable(dots)" is selected in
"Area Size," the size of area marker 1 is
set in the pixels of the input signal and
the "Aspect Mode" setting becomes
invalid.
When "Variable" is selected in "Aspect
Mode"
 Aspect: Sets the aspect ratio of area
Area Size Sets the size of area marker 1 when
"Safe Area Marker" is selected in "Area
Marker1 Mode."
 80% (Default value)
 88%
 90%
93%

 Variable(%)
 Variable(dots)
When "Area Size" is set to
"Variable(%)" or "Variable(dots)"
Width: Sets the width of area marker

 Height: Sets the height of area
H Position Sets the horizontal position of the
marker at the top left corner of the
image display area as the starting
point when "Flexible Area Marker" is
selected in "Area Marker1 Mode." You
can set to a position from 0 to 4095.
marker 1. Set to 1.00:1 to 3.00:1.
(Default value: 1.78:1)
1.
Set to 050 to 100 (%) when
"Variable(%)" is selected.
(Default value: 080 %)
Set to 640 to 4096 (dots) when
"Variable(dots)" is selected. Set
one digit each. (Default value:
1024 dots)
marker 1.
Set to 050 to 100 (%) when
"Variable(%)" is selected.
(Default value: 080 %)
Set to 360 to 2160 (dots) when
"Variable(dots)" is selected. Set
one digit each. (Default value:
0576 dots)
Submenu Setting
V Position Sets the vertical position of the marker
at the top left corner of the image
display area as the starting point when
"Flexible Area Marker" is selected in
"Area Marker1 Mode." You can set to a
position from 0 to 2159. (Default value:
200)
Width Sets the width of the marker when
"Flexible Area Marker" is selected in
"Area Marker1 Mode." You can set to a
position from 1 to 4096.
Height Sets the height of the marker when
"Flexible Area Marker" is selected in
"Area Marker1 Mode." You can set to a
position from 1 to 2160. (Default value:
1760)
Shape Sets the shape of area marker 1.



When "Safe Area Marker" is selected in
"Area Marker1 Mode," the size of the
area differs depending on the "Aspect
Mode" setting.
With 1.896:1
80%
Aspect Mode is
set to 1.896:1
With 4:3
80%
Aspect Mode is
set to 1.896:1
33
Shape A (Default value)
Shape B
Shape C
Note
80%
Aspect Mode is
set to 4:3
80%
Aspect Mode is
set to 4:3