Sony RDR-GX350 Operating Instructions Manual page 80

Component Video Out
Selects the signal format in which the
recorder outputs video signals: interlace or
progressive, from the COMPONENT
VIDEO OUT jacks.
Normal(Inter-
lace)
Progressive
b
Notes
• When you set "LINE 3 Out" to "RGB," you
cannot set "Component Video Out."
• When you connect the recorder to a monitor or
projector via only the COMPONENT VIDEO
OUT jacks, do not set "LINE 3 Out" to "RGB." If
you set "LINE 3 Out" to "RGB," in this case, the
picture may not appear.
• When picture noise appears after you set the
recorder to progressive format, hold down x
(stop) on the recorder, and press Z (open/close)
on the recorder.
• No video signals are output when using the
HDMI connection.
LINE 3 Out
Selects a method of outputting video signals
for the LINE 3 – TV jack.
Video
S-Video
RGB
b
Notes
• If your TV does not accept S-video or RGB
signals, the image will not be displayed in the
selected method on the TV screen even if you
select "S-Video" or "RGB." See the instructions
supplied with your TV.
• SMARTLINK is available only when "Video" is
selected.
• RGB signals are not output when using the HDMI
connection.
80
Outputs signals in the
interlace format.
Outputs signals in the
progressive format. Select
this when you want to view
progressive signals.
Outputs video signals.
Outputs S-video signals.
Outputs RGB signals.
LINE 1 In
Selects a method of inputting video signals
for the LINE 1/DECODER jack. The picture
will not be clear if this setting does not match
the type of video input signal.
Video
Inputs video signals.
S-Video Inputs S-video signals.
RGB
Inputs RGB signals.
Decoder Select this when connecting
to an external decoder
(PAY-TV/Canal Plus
analogue decoder). If you
connect to a cable box/
satellite receiver such as
CanalSat, do not select this
option.
NTSC on PAL TV
Sets the recorder to convert signals of the
NTSC colour system to the PAL colour
system to play NTSC discs on PAL-only
TVs. Refer to the operating instructions
supplied with your TV.
On Plays NTSC discs on PAL-
only TVs.
Off Select this if the connected
TV is a multi-system
(NTSC-compatible) TV.