Panasonic LP-GS Series Serial Communication Command Manual page 109

⿎ Data example
Condition: Object No. = 1, Point No. = 5, Radiation time = 2000, Laser power correction = 100,
X-position = 25.5, Y-position = -7
• Setting
Transmission data
Condition: When setting 4 points:
Object No. = 1, Point No. = 0, Radiation time = 2000, Laser power correction = 100,
X-position = 25.5, Y-position = 7, X-position = 25.5, Y-position = -7,
X-position = -25.5, Y-position = -7, X-position = -25.5, Y-position = 7
• Setting
Transmission data
⿎ Setting request data : When specifying radiation time and laser power correction ratio for
each point
Start
PRD
code
⿎ Data description
Name Data length
(> Name in LP-400/V)
Object No.
(> Point radiation No.)
Point No.
Radiation time
Laser power
correction
Total data length
⿎ Data example
Condition: Object No. = 1, Point No. = 3, Radiation time = 2000, Laser power correction = 100
• Setting
Transmission data
[STX] PRD
[STX] PRD
[Object No.] [Point No.]
S [Radiation time] [Laser power correction]
15-byte
Data content
[byte]
2 "00"–"15": Object No. 1400 to 1415
3 "000"–"049"
7 "00000.1"–"99999.9" [ms]
3 "000"–"999" [%]
15 Fixed-length data.
[STX] PRD
ME-LP-GS-SR-COMP-3
S 0100502000.0100+025.500-007.000
0100002000.0100+025.500+007.000+025.500
S
-007.000-025.500-007.000-025.500+007.000
(Check
sum)
Specifies the radiation time and laser
power correction ratio by a point.
It is not possible to specify the radiation
time and laser power correction ratio for
the multiple points at once.
The unit of the radiation time is always [ms].
The correction ratio is calculated using the
value set at the laser settings as 100%.
S 0100302000.0100 [CR]
[CR]
[CR]
End code
Remarks
109