Power supply cord
< UK 110V>
Two Lead wires of Power supply cord have to be fixed
through the hole of Line filter as shown below.
Rib B
Field Lead wire has to be
fixed between these ribs.
Rib A
リブ A
Lead wires of Power supply cord
have to be fixed.
Lead wire holder A
Field Lead wire has to be
fixed into Lead wire holder A.
Field Lead wire has to be fixed through the
hole of Line filter between Rib B and Lead
wire holder A. (When Line filter is used.)
Makita Corporation
Range A
Edge of sheath
シースの端
Lead wires connected Switch has to be
fixed between these ribs.
Switch
Field Lead wire (White) has to be fixed in this
Lead wire holder.
Note: Fix Power supply cord with
the edge of sheath set in the range A.
Lead wire of Noise suppressor has
to be fixed as shown below.
Lead wire of Noise suppressor has
to be pulled out from Groove A.
(When Noise suppressor is used.)
Groove A
15 / 15