Canceling Finalization (Unfinalize) (Cd-Rw Only) - Sony MVC-CD250 Operating Instructions (primary manual) Operating Instructions Manual

Canceling finalization (Unfinalize) (CD-RW only)

UNFINALIZE
PLACE ON LEVEL SURFACE
READY?
O K
CANCEL
OK
1
, Set the mode dial to
"UNFINALIZE PLACE ON LEVEL
SURFACE" appears on the LCD screen.
• When using a CD-RW, you can cancel the last-
executed finalization (unfinalization). Once
canceled, the disc space used for that
finalization is recovered.
• You can also carry out this operation when the
mode dial is set to S*, A*, M*, SCN or
* MVC-CD400 only
46
2
, Select [OK] with v/V on the
.
control button, then press z.
Unfinalization starts and the disc remaining
indicator changes from
Unfinalization takes about one minute.
Place the camera on a stable surface, and do
not shake or strike the camera during
unfinalization.
.
UNFINALIZE
AVOID ANY VIBRATION
UNFINALIZE IN PROGRESS
to .
RW RW RW RW
To cancel the unfinalization
v V
Select [CANCEL] with / on the control
button, then press z. After canceling the
unfinalization, you can continue and record
images on the CD-RW.
To unfinalize again after canceling
the unfinalization
Set the mode dial to SET UP, then select
[UNFINALIZE] under [DISC TOOL]
in the SET UP settings (page 116).
• You cannot execute unfinalization when you
record a new image or edit an image on a CD-
RW after executing finalization.