Viewing Images On A Tv Screen - Sony MVC-CD250 Operating Instructions (primary manual) Operating Instructions Manual

Viewing images on a TV screen

A/V
connecting
cable
(supplied)
1
A/V OUT (Mono) jack
, Connect the A/V connecting
cable to the A/V OUT (Mono)
jack of the camera and the
audio/video input jacks of the
TV.
• If your TV has stereo input jacks, connect the
audio plug (black) of the A/V connecting cable
to the Lch jack.
• Turn off both your camera and the TV before
connecting the camera and the TV with the A/V
connecting cable.
2
TV/Video switch
, Turn on the TV and set the TV/
Video switch to "Video".
• The name and location of this switch may differ
depending on your TV.
60min
100-0028 2002 7 4
FILE BACK/NEXT
3
, Set the mode dial to
turn on the camera.
Press b/B on the control button to select the
desired image.
• When using your camera abroad, it may be
necessary to switch the video output signal to
match that of your TV system (page 117).
640
6/8
10:30
PM
VOLUME
, and
37