Installation - GE CRxFlex Operating Manual

Installation

Caution: When installing the CRxFlex, care must be taken to ensure that there
is either a mains plug or an all-cable disconnecting device in the internal
installation fitted near the CRxFlex and that it is easily accessible.
Caution: If the CRxFlex is installed inside of an X-ray room it must be protected
from stray radiation by proper shielding.
Caution: In case of unstable power conditions it is advised using an
uninterruptible power supply.
Warning: The CRxFlex is a tabletop digitizer. The structure and stability of the
table used, need to be suitable in relation with the size and weight of the
system. The table should not be subject to excessive shock and vibrations
from other sources, as this may influence the image quality.
Warning: The CRxFlex is heavy (approx. 72 kg. Risk of injuries when lifting the
CRxFlex.



CRxFlex Operating Manual V1.1
Use proper foot and hand protection when lifting the CRxFlex.
Two persons are required to lift and carry the CRxFlex.
Observe local regulations for lifting and carrying of loads.
13