Compatibility; Compliance; General - GE CRxFlex Operating Manual

Compatibility

The CRxFlex must only be used in combination with other equipment or components if these
are expressly recognized by GE as compatible.
Changes or additions to the equipment must only be carried out by persons authorized to do
so by GE. Such changes must comply with best engineering practices and all applicable laws
and regulations.
Accessory equipment connected to any interfaces must be certified according to the
respective IEC standards. Furthermore, all configurations shall comply with the valid version
of the system standard. Everybody who connects additional equipment to the signal input
part or signal output part configures a system, and is therefore responsible that the system
complies with the requirements of the valid version of the system standard. If in doubt,
consult your local service organization

Compliance

General

The product has been designed in accordance to DIRECTIVE 2006/95/EC (Low Voltage
Directive) and DIRECTIVE 2004/108/EC (Electromagnetic Compatibility) of the EUROPEAN
PARLIAMENT and of the COUNCIL.
Applicable EC directive(s)
Directive 2004/108/EC
Directive 2006/95/EC
Directive 2011/65/EU
Directive 2012/19/EU
Applicable EC harmonized standard(s)
EN 61010-1 : 2010
IEC/EN60825-1:2014
IEC 61326-1: 2012
IEC/CISPR 11:2009 + A1:2010 group 1, class A
IEC 61000-6-4:2006 + A1:2010
IEC 61000-3-2:2014
IEC 61000-3-3:2013
IEC 61000-6-2:2005
10
EMC Directive
Low Voltage Directive
RoHS Directive
WEEE Directive
CRxFlex Operating Manual V1.11