Makita 6842 Technical Information page 16

W
iring diagram
[2] Wiring in Housing
Note: Noise suppressor and Earth terminal (Ground terminal) are not used for some countries.
Fig. D-5
Route the following Lead wires between
this screw boss and the inside wall of Housing (L):
*Lead wire to Brush holder (purple)
*Field lead wire (white)
Fix the following Lead wires
with this Lead wire holder:
*Lead wire to Brush holder
(purple)
*Lead wire to Brush holder
(orange)
*Field lead wire (white)
*Field lead wire (red)
Put Noise suppressor in place
so that the wire side faces
towards Strain relief.
Strain relief
The following Lead wires must be tight between
Switch terminal and Lead wire holder:
*Lead wire to Brush holder (orange)
*Field lead wire (red)
screw boss
Switch
Noise
suppressor
rib B
rib A Route all Lead wires
between rib A and rib B.
Earth terminal
(Ground terminal)
for Noise suppressor
Field
P 16/16
Endbell complete