Related Manuals for Makita 6840
Summary of Contents for Makita 6840
- Page 1 INSTRUCTION MANUAL Auto Feed Screwdriver 6840 6841 DOUBLE INSULATION Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model 6840 6841 Screw strip 4 mm x 25 mm - 41 mm No load speed (min 4,700 6,000 Overall length 343 mm Net weight 1.7 - 2.5 kg Safety class without notice. • The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table. -
Page 3: Screwdriver Safety Warnings
Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. to power source and/or battery pack, picking Carrying power tools with Power tools are dangerous in the... -
Page 4: Functional Description
This tool has a reversing switch to change the direction WARNING: DO NOT let comfort or familiarity of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for coun- terclockwise rotation. CAUTION: instruction manual may cause serious personal injury. - Page 5 There are 3 positive-lock screw length settings. To obtain the desired setting, pull out the stopper base while depressing the lever until you see the number of Loosen the thumb screws which secure the casing. Pull the desired screw length (indicated on the plate) appear out the casing in the direction of the arrow.
-
Page 6: Driving Operation
1. Driving position Insert the screw strip through the screw guide. Then reaches the position next to the driving position. 1. Extension handle Removing screw strip Use of extension handle allows you to drive screws into of the arrow. OPERATION Driving operation If you depress the reverse button, you can pull out the screw strip in the reverse direction of the arrow. -
Page 7: Maintenance
Discoloration, deformation or cracks may result. persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center. • Phillips bit •... -
Page 8: M Ak I T A C Or Por At I On
M ak i t a C or por at i on 3- 11- 8, S um i y os hi - c ho, A nj o, A i c hi 446- 8502 J apan 884721A935 20170427 w w w . m ak i t a. c om...