Makita 6842 Technical Information page 10

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Stopper Base Section
DISASSEMBLING
Disassemble by taking the steps described in Fig. 28 to Fig. 31.
Fig. 28
1) Remove Guide box complete from Stopper base together with
Guard first by inserting slotted screwdriver into the rectangular
hole of Stopper base, then by pushing Guide box complete
with the screwdriver.
slotted screwdriver
Stopper base
Fig. 30
3) Guide box complete can be disassembled as illustrated below
using 1R032, 1R266 and arbor press.
(The parts with asterisk: one each on left and right side)
Guide box
1R266
1R032
Pin 2*
[3] -3. Clutch Section and Helical Gears
DISASSEMBLING
Disassemble by taking the steps described in Fig. 32 to Fig. 37.
Fig. 32
1) After removing Casing assembly (Fig. 2
on page 3), remove Belt clip from Housing
by unscrewing M5x13 Screw.
M5x13 Screw
rectangular hole
Guide box complete
Guard
Guide*
Torsion spring 4*
Fig. 33
2) Remove Housing (R) from Housing (L) by unscrewing ten
4x20 Tapping screws. Assembly of Screw guide and Guide
attachment can be removed in this step.
Housing
Belt clip
Housing (L)
Fig. 29
2) Separate Guard from Guide box complete.
Guide box complete
Fig. 31
4) Cap can be removed from Stopper base
using slotted screwdriver.
Cap
Stopper base
Assembly of Screw guide and Guide attachment
Housing (R)
P 10/16
Guard
4x20 Tapping screw
(10 pcs)