Advertisement
[10] ADJUSTMENT IN POSITION OF LEVER PLATE FOR DEPTH GUIDE
The assembled angle of Lever plate and Depth guide has to be adjusted in
the zone from 0 degree to 30 degrees as illustrated in Fig. 28.
[11] ADJUSTMENT IN POSITION OF LEVER PLATE FOR ANGULAR GUIDE
The assembled angle of Lever plate and Base has to be adjusted in the zone
from 40 degrees to 70 degrees as illustrated in Fig. 29 when blade angle to
Base is set at 90 degrees.
C
ircuit diagram
Fig. D-1
Color index of lead wires' sheath
Black
White
Power supply cord
W
iring diagram
Fig. D-2
Route the field lead wires between
rib and the wall of Handle set.
Inflect the connecting terminal
so that it does not interfere with
the wiring of lead wires.
Fix the lead wires into
the lead wire holders.
Power Supply Cord
Switch
Polyethylene tube
Switch
Rib
Pin
Polyethylene Tube for bundling field lead wires
Fig. 28
Fig. 29
Lever plate
Base
Field
Route the field lead wires
between pin and the wall
of handle set to keep the
polyethylene tube in the
illustrated position.
P 8/ 8
30
degrees
Lever plate
70 degrees
40
degrees
Advertisement
