Advertisement
Setting Manual of Music Sequence Data for XW-PD1
1.
Download the Music Sequence Set data.
[Download data]
Windows: DreamTeam̲data.zip
Macintosh: DreamTeam̲data.dmg
2.
Connect your computer that has been installed
TRACKFORMER STUDIO and XW-PD1 by USB cable.
3.
Connect the AC adaptor for XW-PD1,
and turn on the power it.
4.
Start the TRACKFORMER STUDIO.
※If you could see <disconnected>, TRACKFORMER
STUDIO does not recognize the XW-PD1.
→Check if the XW-PD1 is connected and turned on.
5.
Select "Transfer".
CABLE
６.
Click "Data type selection box"(①) and select
"Step Sequencer".
①Data type selection box
７.
Drag and drop the downloaded data file
(DreamTeam.ZSS) to "XW-PD1 data list"(②).
８.
Click "Data type selection box"(①) and select
"User Sample (Short)". And assign the each ZWT
file to the following area number.
NOTE：
In the case of using these data, if you already
have put some file to the area#00 to #23 in User
Sample, please move to the other numbers and
adjust it.
③Reload button
②XW−PD1 data list
１
Advertisement
