Basics; Making Calls - Sony SPP-N1025 Operating Instructions Manual

Basics

Making calls

(HOLD)
(FLASH)
(*TONE)
(CHANNEL)
Additional tasks
To
Select a better channel
Adjust the handset volume
Put a call on hold
Switch to tone dialing temporarily
Switch to another call
("call waiting" service*)
Turn on/off the ringer of the
handset
* You need to subscribe to the service from your telephone company.
18 US
Basics
(REDIAL/PAUSE)
Do this
Press (CHANNEL).
Raise or lower the Jog lever to set the
handset volume.
Press (HOLD).
Press (HOLD) or (TALK) to resume the
conversation.
Press (*TONE) after you're connected. " "
appears on the display.
The line will remain in tone dialing until
disconnected.
Press (FLASH).
Press (FLASH) again to return to the first
caller.
See page 31.
1
Pick up the handset from the
base phone.
2
Press (TALK) and wait until
"TALK" appears on the display.
You will then hear a dial tone.
The LINE lamp on the base
phone lights up.
If "NO CONNECT" appears on
the display, move closer to the
base phone.
3
Dial the phone number.
4
When you're done talking, press
(OFF) or replace the handset on
the base phone.
The display and the LINE lamp
on the base phone go off.