Step 4: Choose The Dialing Mode - Sony SPP-N1025 Operating Instructions Manual

Step 4
Choose the dialing mode
For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).
Note
Do not allow more than 20 seconds to elapse between each step of the procedure.
Tip
You may press (SELECT) instead of pressing (PGM) in step 4.
If you aren't sure of your dialing system
Make a trial call with the dialing mode set to "TONE".
If the call connects, leave the setting as is; otherwise, set to "PULSE".
12 US
Getting Started
1
Press (PGM).
2
Raise or lower the Jog lever until
"DIAL MODE" appears on the
display.
3
Press (SELECT).
DIAL MODE: TONE
4
Raise or lower the Jog lever to choose
the dialing mode ("TONE" or
"PULSE"), and then press (PGM).
You will hear a long confirmation
beep.