Checking Xm Wx Subscriptions - Honeywell Bendix/King KMD 550 Pilot's Manual Addendum

FIS Subscriptions
should remain in view of the satellites during the subscription
process.
5. Verify the activation of the receiver and the subscription validity by
selecting and viewing the "FIS Subscription Status Page" on the
KMD screen.
If for any reason the receiver was not exposed to the XM signal within
the initial 24 hour broadcast period, or is not successfully authorized for
some other reason, a subsequent 15 minute resend of the subscription
information can be obtained. Get the receiver ID (instructions in step 1a
or 1b above), go to the website http://www.xmradio.com/refresh/ , and
follow the instructions.

CHECKING XM WX SUBSCRIPTIONS

To check the FIS XM sub-
scription and receiver status,
apply power to the display
and receiver, select the AUX
key, then the WX SETUP
softkey, the FIS softkey, and
finally the FIS SUBSCR
softkey, as in step 1b previ-
ously.
The Application IDs are dis-
played along
receiver activation and sub-
scription status.
Application IDs provide the groupings of products that are part of the
subscription package. Green checkmarks indicate those App IDs or
product groups that are contained in the subscription package for the XM
receiver. Contact XM Radio at 1-800-985-9200 with the App ID informa-
tion if the subscribed products are not received and displayed.
Symbol Subscription Status
—
(white)
Revision 6 Feb/2009
with the
The
No Information
Not Subscribed
Subscribed
Figure 38c
Description
The XM FIS receiver subscription
information message has not
been received.
The user is not authorized for the
Application ID.
The user is authorized for the
Application ID.
32
KMD 550/850 FIS Addendum