Viewing The Surrounding Environment; See-Through - Sony LDI-100B Operating Instructions Manual

Viewing the surrounding environment

While you are wearing the Personal LCD Display, you can view the surrounding environment through the
screen in two ways:
Viewing the surrounding
environment by adjusting the
transparency of the entire
screen (See-through mode)
You can adjust the level of transparency of the
entire screen with the LCD shutter dial.
The picture becomes The area surrounding
transparent. the picture also
becomes transparent.
Turn the SEE-THROUGH dial.
Note
If there is a bright light near the display unit, you
may not be able to completely black out the
surrounding environment by adjusting the SEE-
THROUGH dial.
SEE - THROUGH
CLOSE OPEN
Viewing the surrounding
environment in the area
around the picture only
(Screen mode)
You can adjust the level of transparency of the
screen area around the picture only. The picture
remains intact.
The picture remains The area surrounding
intact. the picture becomes
transparent.
Set the SCREEN switch to
ON.
In this mode, the screen does not become
transparent even if you turn the SEE-
THROUGH dial.
Notes
• When you set the SCREEN switch to ON, the
edges of the picture may fade a bit, but this is not
a malfunction.
• If there is a bright light near the display unit, you
may not be able to completely black out the
surrounding environment around the picture by
adjusting the SEE-THROUGH dial when you set
the SCREEN switch to on.
SCREEN
ON OFF
21
-US