Sony LDI-100B Operating Instructions Manual page 14

Connecting the Personal LCD Display (continued)
If your video equipment has an S-video jack
Connect the Personal LCD Display to the video equipment using a commercially available
S-video cable and an audio/video cable to enjoy the highest quality pictures. In this case, you do not need to
connect the video (yellow) plug. If you connect both the S-video and video plugs, the S-video signal is
automatically selected. When you connect the Personal LCD Display to the video equipment, set the PC-
VIDEO switch on the power supply box to "VIDEO."
S VIDEO
AUDIO / VIDEO
to AUDIO/VIDEO connector
: Signal flow
About the AUDIO/VIDEO input jack
The AUDIO/VIDEO input jack of the Personal
LCD Display is a special minijack, and the signal
connections are aligned as shown on the right. This
alignment may differ depending on the equipment.
14
-US
Set the PC-VIDEO switch
to "VIDEO."
Power supply box
S-video cable
to S VIDEO connector
Audio/video cable
(special miniplug
miniplug)
Audio/video cable
(special miniplug
plug)
VCR, Laser disc player, DVD
player, camcorder, etc.
to S-video output
special
Video (yellow)
Audio L (white)
phono
Audio R (red)
Audio L
to audio/video output
to audio/video outputs
Audio R
GND
Video