Sony LDI-100B Operating Instructions Manual page 12

Connecting the Personal LCD Display (continued)
Connecting a Macintosh (desktop models)
Depending on the model, you may need to use a commercially available Macintosh adapter to connect a
commercially available RGB signal cable as shown below. When you connect the Personal LCD Display
to your Macintosh, set the PC-VIDEO switch on the power supply box to "PC."
to monitor port
of Macintosh
to monitor port
Macintosh
adapter
Notes on connection
• Use a commercially available Macintosh adapter which suppors the models after the Macintosh II series.
• Set the display setting to 16-inch display mode (832
LCD Display cannot display images with the 19-inch display mode (1024 768) setting or more.
12
-US
(D-Sub 15-pin,
to monitor
male)
port
Set the PC-VIDEO switch
to "PC."
to audio port
Audio cable
RGB signal cable
: Signal flow
VGA type connector
(HD15, female)
PC RGB
AUDIO
to PC AUDIO
connector
624) or 13-inch display mode (640 480). The Personal
to RGB signal cable
Power supply box
to RGB connector