Sorting Clip Lists - Sony PDW-R1 Operation Manual

"00:00.00.00." You can set the initial time code to any
value.
1
Load an existing clip list for which you want to set the
initial time code into to the unit memory as the current
clip list.
For details, see 5-3-1 "Loading a Clip List From Disc
Into Unit Memory" (page 68).
2
Display the CLIP menu.
See "To display the CLIP menu" (page 68).
3
Use the f button to select TC PRESET, and then press
the g button.
A screen like the one shown below appears.
CLIP LIST TC PRESET
00:00.00.00
INC/DEC :
SHIFT : ( )( ) KEY
DATA SAVE :
TO MENU :
The time code shown in this screen is the current initial
time code of the current clip list. If you have already
set the initial time code for this clip list, that time code
is displayed.
4
Repeat the following operations to set a time code
value (LTC).
• Press the G or g button to select the digit to replace.
• Rotate the jog dial to set a value.
5
Press the SET button.
The initial time code (LTC) of the current clip list is
set. When the clip list is played back, time code will
start counting from that value.
To check the time code after setting it
Press the SUBCLIP button, turning it on. The initial
time code of the current clip list appears in the TCR
field.
6
Save the current clip list to disc.
See 5-2-6 "Saving the Current Clip List to Disc" (page
66).
70
5-3 Managing Clip Lists (CLIP Menu)
JOG DIAL
SET KEY
MENU KEY

5-3-5 Sorting Clip Lists

Proceed as follows to sort the existing clip lists by clip list
name or by date of creation.
1
Display the CLIP menu.
See "To display the CLIP menu" (page 68).
2
Use the F or f button to select SORT BY, and then
press the g button.
A screen like the one shown below appears.
CLIP MENU
SORT BY : name
*NAME(A-Z)
DATE(NEWEST FIRST)
3
Use the F or f button to select NAME or DATE.
NAME: Sort in ascending order by clip list name
(factory default setting).
DATE: Sort by date of creation, with the newest clip
list first.
4
Press the G button to return to the CLIP menu screen.
The clip lists are sorted by the method you chose in
step 3.
Unused clip lists are excluded from the sort.