Text Mode - Motorola D15 Integration And Application Developers Manual

Table 22 - ETSI07.05 MT Responses sent from phone to host
Response
DELETE MESSAGE COMPLETE
DELETE MESSAGE FAILURE
END SMS MODE
GET MESSAGE FAILURE
INC MESSAGE
INSERT SMS COMPLETE
INSERT SMS FAILURE
MESSAGE
MESSAGE ARRIVED
MESSAGE LIST
REQUEST CONFIRMED
UNABLE TO PROCESS

4.13.2 Text Mode

Text Mode is fully described in GSM 07.05, section 3.
Text mode is not supported by the d15 module, but these commands are supported as they are useful for
PDU mode.
Command
+CESP
+CMGD
+CMGF
+CMS ERROR
+CNMI
+CPMS
+CSCA
+CSMS
d15 Modem Integration and Application Developers Guide version draft 0.53
Description
Host's request to delete a message has been completed
Host's request to delete a message has failed
Phone is exiting SMS mode
Sent when a request for a message cannot be fulfilled
Sent if incoming message transfer to host has been requested
Host's request to insert a message has been completed
Host's request to insert a message has failed
Sent when a message has been requested
Send if indication of incoming messages has been requested
Sent on receipt of LIST REQUEST
Request received and will be performed
Host's request could not be processed
Table 23 - ETSI 07.05 Text Mode
Description
Enter SMS Block Mode Protocol
Delete Message
Message format: PDU or text mode selection, PDU = default
Response. Indicates error has occurred in mobile or network
New Message indication
Preferred message storage
Service Centre Address
Select message service (phase 2, phase 2+, etc.)
ETSI 07.05
Reference
2.4.2.8
2.4.2.9
2.4.2.11
2.4.2.3
2.4.2.4
2.4.2.6
2.4.2.7
2.4.2.2
2.4.2.5
2.4.2.1
2.4.2.12
2.4.2.10
ETSI 07.05
Reference
3.2.4
3.5.4
3.2.3
3.2.5
3.4.1
3.2.2
3.3.1
3.2.1
Page 70 of 181