Cisco 8821 Setup page 16

Phone Configuration Tasks
1. Ensure that your Cisco Unified Communications Manager has the latest firmware load and any required
device packages.
2. (Optional) Set up Wi-Fi profiles, Wi-Fi profile groups, phone button templates, softkey templates,
and the common phone profile on the Cisco Unified Communications Manager.
3. (Optional) Set up the Cisco Unified Communications Manager to automatically register phones.
3. If your Cisco Unified Communications Manager is not set up for automatic phone registration,
1. Set up the new user.
2. Add the new phone.
3. Associated the new phone to the user.
4. Enable the features that the user needs.
4. Set up the phone to connect to the call control system.
After the phone is connected to the call control system, it should automatically update to the latest firmware
load.
Related Topics
Cisco Unified Communications Manager Phone Configuration
Configuration on the Phone
Determine the MAC Address of the Phone
Phone Setup
16
Phone Setup