Phone Configuration Tasks - Cisco 8821 Setup

Phone Setup
Caution
Do not charge the phone in a hazardous environment.
Do not charge the phone if it is wet.
Procedure
Step 1
Connect the long connecter of the USB cable to the bottom of the phone with the pins aligned.
Step 2 Plug the other end into the USB port in the computer.

Phone Configuration Tasks

When you set up a new phone, you connect it to your call control system and set up the phone features. This
connection takes the following steps.
1. Gather information. You need the following information:
2. Set up the call control system:
• Wireless access point information: SSID, security type, security password or pin or key
• MAC address of the phone
• Directory number plan, to determine the DN to assign to the user
Phone Configuration Tasks
Phone Setup
15