Chapter 2 Playback; Playing Back - Sony TC-K615S Operating Instructions Manual

Chapter 2 Playback

Playing Back

Follow the procedure below to play back a cassette.
4
POWER
ON
COUNTER
RESET MEMORY
POWER
PAUSE REC MUTE REC
·
p 0 ) P R r
0 AMS )
1
Turn on the amplifier and select the tape
function.
2
Insert a cassette with the side to be
played facing outward.
EJECT
§
3
Set DOLBY NR to the same position that
was used when the cassette was
recorded.
DOLBY NR
OFF
4
Press · to start playback.
·
To stop playback, press the p button.
To stop playback momentarily, press the P button.
To restart playback, press the P or · button.
To fastwind a tape rightward, press the ) button in stop
mode.
To fastwind the tape leftward, press the 0 button in stop
mode.
3
REC LEVEL
MPX FILTER
5
Ø ON ø OFF
4 6
•
3 7
DOLBY NR BIAS REC LEVEL
OFF 8
• B • • 2 BALANCE
•
C
S 1 9
•
0
– + – + 10 L R
EJECT
MONITOR CALIBRATION HEADPHONES
§
2
MPX
Ø ON
DO
COUNTER
RESET MEMORY
POWER
E
PAUSE REC MUTE REC
p 0 · ) P R r
0 AMS )
B
C
S
Specifying the tape type is unnecessary
The deck has an automatic tape type detection system.
To begin recording during playback
While holding down the · button, press the r button. The
unit immediately begins recording without stopping the
tape. This function is useful when editing previously
recorded material.
For headphone listening
Insert the headphone plug to the HEADPHONES jack.
Selecting TAPE mode with the MONITOR button is
unnecessary
The unit automatically enters TAPE mode and the TAPE
indicator lights up.
What is the Dolby NR system?
The Dolby NR (noise reduction) system reduces tape hiss
noise in low-level, high-frequency signals by boosting the
signals during recording and lowering them during
playback.
The Dolby S NR system provides the highest reduction in
tape hiss noise in both low and high frequencies.
Note
The Dolby HX PRO system is effective only during
recording, not during playback.
7