Samsung DCS-816 General Description Manual

Digital communication system

Advertisement

DCS-816
DIGITAL COMMUNICATION SYSTEM
for Europe
G
ENERAL
D
ESCRIPTION

Advertisement

Table of Contents
loading

Summary of Contents for Samsung DCS-816

  • Page 1 DCS-816 DIGITAL COMMUNICATION SYSTEM for Europe ENERAL ESCRIPTION...
  • Page 2 SAMSUNG ELECTRONICS CO. LTD. Publication Information Samsung Electronics reserves the right without prior notice to revise information in this publication for any reason. Samsung Electronics also reserves the right without prior notice to make changes in design or components of equipment as engineering and manufacturing may warrant.
  • Page 3: Table Of Contents

    4.4 Station Feature Descriptions ......................4 - 17 4.5 Display Features ..........................4 - 23 4.6 Display Feature Descriptions ......................4 - 23 FIGURES DCS-816 System Configuration Table DCS-816 System Configuration DCS-816 Key Service Unit LCD 24B Model Keyset STD 24B Model Keyset...
  • Page 4: Part 1. System Overview

    NOTE: 1. It is not possible to expand from DCS-816 to other DCS systems (e.g. DCS, DCS Compact). 2. DCS-816 cannot accommodate cards from other Samsung digital systems except for the DCS Compact BRI card.
  • Page 5: Size And Configuration

    The Trunk Expansion slot provides an option to select an analogue trunk card or a BRI card. The DCS-816 system also has some option cards to provide serial I/O ports or AA facilities. The Basic KSU has two (2) analogue trunk ports and 16 stations, and the trunk expansion slot provides a maximum capacity of 10 trunk ports and 16 stations.
  • Page 6 4 Single Line Telephones (Basic KSU) 1016 System (Analogue/Digital Trunk) 4BRI 4 BRI ports (8 channels) 2 Analogue C.O. Lines (Basic KSU) 12 Keysets (Basic KSU) 4 Single Line Telephones (Basic KSU) Figure 1-1 DCS-816 System Configuration Table 1 - 3...
  • Page 7 2. Only one (1) trunk expansion card can be installed. 3. Only one SIO option card and one AA option card can be installed. 4. The system cannot accommodate cards from other Samsung digital systems except for the DCS Compact BRI card.
  • Page 8: Technology

    Processors (DSPs). Each DSP may be configured by the switching control program as a DTMF sender, a DTMF receiver or as a C.O. tone detector on a per-call basis. DCS-816 is equipped with one engine chip containing four (4) DSP channels.
  • Page 9: Part 2. Hardware Descriptions

    SAMSUNG General Description DCS-816 March 1999 PART 2. DCS-816 - HARDWARE DESCRIPTIONS 2.1 Basic Key Service Unit The DCS-816 Key Service Unit (KSU, Figure 2-1) is a single metal cabinet containing the following: • A power supply • Processing, memory and switching:...
  • Page 10: Option Cards

    MPD or PRS, which is optional. The MPD or PRS hybrid chips from the DCS system can be used. 2BRI Card The DCS-816 system accommodates the 2BRI card from the DCS Compact system, which contains two (2) basic rate access ports, i.e. four (4) ISDN channels. Protocol is compatible with Euro-ISDN BRI.
  • Page 11: Specifications

    SAMSUNG General Description DCS-816 March 1999 2.4 SPECIFICATIONS The following tables provide technical data for the DCS-816 hybrid/key telephone system. ELECTRICAL SPECIFICATIONS AC INPUT 220 VAC ± 20%, 48-63 Hz POWER CONSUMPTION (MAX) 60 WATTS MAX DC OUTPUT FUSE RATING 2.0 AMP +5 VOLTS 1.5 AMPS MAX...
  • Page 12 SAMSUNG General Description DCS-816 March 1999 KEYSET LED INDICATIONS CONDITION LED COLOUR LED ON LED OFF LINE IDLE LINE IN USE RED/GREEN STEADY RECALL AMBER 500 ms 500 ms CALL ON HOLD RED/GREEN 500 ms 500 ms RINGING C.O. CALL...
  • Page 13: Part 3. Station Equipment

    SAMSUNG General Description DCS-816 March 1999 PART 3. STATION EQUIPMENT 3.1 LCD 24B Model Keyset (Figure 3-1) • Built-in speakerphone • 24 programmable soft keys (16 with tri-coloured LEDs) • Eight fixed-function keys • 32-character display (2 x 16) with three associated soft keys and a scroll key •...
  • Page 14: Lcd 12B Model Keyset (Figure 3-3)

    SAMSUNG General Description DCS-816 March 1999 3.3 LCD 12B Model Keyset (Figure 3-3) • Built-in speakerphone • 12 programmable soft keys (6 with tri-coloured LEDs) • Eight fixed-function keys • 32-character display (2 x 16) with three associated soft keys and a scroll key •...
  • Page 15: Enhanced 6B Model Keyset (Figure 3-5)

    SAMSUNG General Description DCS-816 March 1999 3.5 Enhanced 6B Model Keyset (Figure 3-5) • Built-in speakerphone • 6 programmable keys • Four fixed-function keys • UP/DOWN keys for digital control of speaker, handset and ringer volumes • Eight selectable ring tones per keyset •...
  • Page 16: Door Phone Interface Module (Dpim) And Door Phone (Figure 3-7)

    SAMSUNG General Description DCS-816 March 1999 3.7 Door Phone Interface Module (DPIM) and Door Phone (Figure 3-7) • The DPIM adapts any DLI circuit for use with the door phone unit • Commonly used to request entry through locked doors (interior or exterior) or as a room monitoring box •...
  • Page 17: Part 4. Features

    SAMSUNG General Description DCS-816 March 1999 PART 4. FEATURES 4.1 SYSTEM FEATURES Account Code Entry External Music Interfaces Forced External Page Interfaces Voluntary Flash Key Operation All Call Voice Page Flexible Numbering Attention Tone Flexible Ringing Authorisation Codes Hot Line...
  • Page 18: System Feature Descriptions

    SAMSUNG General Description DCS-816 March 1999 4.2 SYSTEM FEATURE DESCRIPTIONS Account Code Entry Station users may enter an account code (maximum 12 digits) before hanging up from a call. This account code will appear in the last column of the SMDR printout for that call record.
  • Page 19 SAMSUNG General Description DCS-816 March 1999 sorry. There is no answer", "That station is busy" and "Invalid number. Please try again". Two minutes of battery–backed random access memory (RAM) provide up to 48 customer recordings for announcements or greetings. Twelve individual greeting boxes, each with its own dialling options, allow you to build call routing branches as needed.
  • Page 20 SAMSUNG General Description DCS-816 March 1999 timer is programmable on a per–station basis to allow for differences in individual work habits. Busy/No Answer This feature allows the station user to use both types of forwarding simultaneously, provided the destinations have already been entered in the usual manner.
  • Page 21 SAMSUNG General Description DCS-816 March 1999 users either dial the access code or press the assigned feature key followed by the pickup group number. You can pick up not only incoming and intercom call, but also hold recalling call if allowed.
  • Page 22 CLIP to provide names for regular callers. Common Bell Control DCS-816 provides a dry contact to control a customer–provided common bell or common audible device. This contact must be programmed as a member of a station group and may provide steady or interrupted closure.
  • Page 23 DCS-816 March 1999 First Party Call Control. A DCS-816 Computer Telephony Module (CTM) is required to connect any keyset to a PC running Windows 3.1 or Windows 95. The number of CTMs that can be installed on a system is only limited to the number of keyphones.
  • Page 24 SAMSUNG General Description DCS-816 March 1999 Directory Names Each station, station group and C.O. line may be assigned a directory name (maximum 11 characters). In addition, each personal speed dial number, system speed dial number and entry in the DDI translation table may be assigned a name (maximum 11 characters).
  • Page 25 This source can be used for background music, station music on hold or trunk music on hold. External Page Interfaces DCS-816 provides one external page output and it can be assigned to operate with the dry contact in the system. Flash Key Operation While a user is on an outside line, pressing the FLASH key will flash the central office or PBX.
  • Page 26 Each station in the system can be individually programmed to allow or deny dialling out as well as allow or deny answering for each outside line. ISDN Service For DCS-816, the DCS Compact 2BRI or 4BRI card can be installed. 2BRI Provides 2 BRI ports, has four channels.
  • Page 27 SAMSUNG General Description DCS-816 March 1999 • Routing by time of day and day of week • Routing according to individual station class • Modify digits table: 100 entries • Flexible trunk group advance timer • Option to use or not use trunk group advance warning tones •...
  • Page 28 This feature is operated manually only and is not affected by auto night time. Holiday There are 60 holiday tables. If it is a holiday, DCS-816 operates on night mode. Operator Group The station groups can contain 16 stations to answer incoming calls. Calls to this group can be set for distributed, sequential or unconditional ringing.
  • Page 29 SAMSUNG General Description DCS-816 March 1999 denied the ability to make and/or receive page announcement to/from any zone or combination of zones. Power Failure Transfer If power fails, these relays can be used to reroute the first two C.O. lines on the base board to SLTs (stations 15 and 16).
  • Page 30 SAMSUNG General Description DCS-816 March 1999 these extensions, compatibility should be checked before purchasing to ensure correct operation. Central office ring cadence can be selected for SLT stations. This is helpful when optional devices cannot detect intercom ring cadence. Speed Dial Numbers The system has a library of 500 speed dial numbers which may be allocated between the system list and stations as needed.
  • Page 31 SAMSUNG General Description DCS-816 March 1999 Toll Restriction (Call Barring) There are 200 allow and 200 deny entries of 11 digits each. Each of these entries can apply to dialling classes B, C, D, E, F and G. Expensive, premium rate and operator–assisted calls, as well as specific area and office codes, can...
  • Page 32 Keyset users can press one key to retrieve messages from the voice mail system. The VPN (Virtual Private Network) feature allows the DCS-816 to operate in a closed numbering group based on a 5 or 6 digit dialling plan for all members of the closed numbering group.
  • Page 33: Station Features

    SAMSUNG General Description DCS-816 March 1999 tables to identify and route calls within the closed numbering group and normal external calls. Local site calls are identified based on a programmable 2- digit self-identification code. The system, when the feature is set to ON in MMC 210, automatically enters LCR mode and analyses the digits dialled.
  • Page 34 SAMSUNG General Description DCS-816 March 1999 CALL key automatically puts the call on hold when this feature is enabled. Pressing TRSF, CONFERENCE, PAGE or a DSS key will always automatically place the call on hold. This type of automatic hold is not a user–selectable option.
  • Page 35 SAMSUNG General Description DCS-816 March 1999 answer any call ringing within a pickup group. Pickup keys may be customised with extenders to allow pickup from a specific station or pickup group. The DCS- 816 has 8 programmable pickup groups. Dial By Name Each system and personal speed dial number can have an associated directory name.
  • Page 36 SAMSUNG General Description DCS-816 March 1999 Hearing Aid Compatible All keysets are hearing aid compatible. Line Queuing with Callback When the desired outside is busy, the user can press the CALLBACK key or dial the access code to place his/her station in a queue. The user will be called back when the line is available (a maximum of 100 callbacks are allowed system–wide...
  • Page 37 SAMSUNG General Description DCS-816 March 1999 One–Touch Dialling Keys Frequently–used speed numbers can be assigned to one–touch dialling keys for fast accurate dialling. On–Hook Dialling Any keyset user can originate calls without lifting the handset. When the called party answers, the user may speak into the microphone or lift the handset for more privacy.
  • Page 38 SAMSUNG General Description DCS-816 March 1999 • Auto Retry – When an outside number is dialled and a busy signal is received, the auto retry feature can be used to reserve the outside line and automatically redial the number for a programmable number of attempts.
  • Page 39: Display Features

    SAMSUNG General Description DCS-816 March 1999 4.5 DISPLAY FEATURES Account Code Display Calling Party Number Call Duration Timer Conference Information Call For Group Identification Date And Time Display Call Processing Information Dialled Number CLIP Information Enhanced Station Programming Name/Number Display...
  • Page 40 This feature allows selected stations with a special class of service to investigate any call in progress. If CLIP information is available for an incoming call, the selected stations can know to whom the DCS-816 user is speaking. On outgoing calls, the selected stations can see who was called.
  • Page 41 SAMSUNG General Description DCS-816 March 1999 Calling Party Name For intercom calls, LCD 24B and LCD 12B keysets show the calling party's name before answering. The names must be stored in the system directory list and can be up to 11 characters long.
  • Page 42 SAMSUNG General Description DCS-816 March 1999 Outside Line Identification Each line can be identified with an 11–character name. Incoming calls display this name before the call is answered. This feature is helpful when individual lines must be answered with different greetings.

Table of Contents