Disassembly For Repair; 维修拆卸 - Kenwood NXR-810 Service Manual

NXR-810
1. How to Remove the Panel Assy (ABS)
Note: You can remove the panel assembly (ABS) without
removing the top panel (A62-1148-03).
1. To remove the panel (TX-RX, w ), loosen the 6 screws ( q ).
2. To remove the panel assembly (Front, r ), loosen the 6
screws ( e ).
3. The panel assembly (ABS) is securely fastened by 4 tabs
( t ) on the top and bottom. You can remove the panel as-
sembly by pulling to the front while you are pulling up the
tabs.
16

DISASSEMBLY FOR REPAIR /

维修拆卸
1. 如何拆下面板组件 (ABS)
注意 : 您可以拆下面板组件 ( A B S ) 而不拆下顶板 ( A62-1148-
03)。
1. 要拆下面板 (TX-RX, ② )，请松开 6 颗螺丝 ( ① )。
2. 要拆下面板组件（前部，④ )，请松开 6 颗螺丝 ( ③ )。
3. 面板组件 ( A B S ) 由上下 4 个卡舌 ( ⑤ ) 牢牢固定。在向上
拔卡舌的同时向前拉面板组件，便可将其拆下。