Advertisement
(3)ASSEMBLY OF SAFETY COVER
1) Insert Spiral spring 26 into the oval hole in Safety cover , making spring's tip meet the hole.
2) Making Center washer meet four bosses in Safety cover , and attach it. (See Fig.1)
3) By putting the tip of Spiral spring 26 into Center cover hole, attach Center cover as shown in Fig. 2.
4) Attach Center plate, making it meet four bosses in Safety cover, and tighten it with Pan head screw M5.
Center cover hole
Oval hole in Safety cover
Spiral spring 26
Spiral spring 26
Flat washer 5
Center washer
Pan head screw M5
Center plate
Center cover
Fig. 1
Fig. 2
Safety Cover
(5) Fastrening of Hex bolt M8 on teh Turn Base
Hex Lock Nut M8 has to be so fastened that the turn base can move smoothly without trembling.
Turn base
Hex. lock nut M8
Base
Lock lever
Advertisement
