To Scan An Original, While Enhancing Black - Toshiba e-Studio6506AC Imaging Manual

5. Scanning-specific Adjustments

5.6 To Scan an Original, while Enhancing Black

Before adjustment
Black is not dark enough, compared to the
original.
 Explanation
When a full-color original is scanned, black is not dark enough, compared to the original. (In general, the
scanned-in image is likely to become less dark.) Finely adjust the black density of the scanned-in image, in order
to darken black and closely match it with the original hue.
* This adjustment will have an effect only on the image scanned in the Full color mode (including the Auto color
mode).
e-STUDIO5506AC/6506AC/7506AC (Ver01)
Scan
5-14
After adjustment
Black is enhanced and closely matched with
the original hue.
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
Scan