2.21 To Obtain Image in Even Density Level
Original
When the density is adjusted automatically, the
density on the entire copy image becomes
uneven.
Explanation
When an original with a background is copied in the automatic density adjustment mode, unevenness may occur
on the copied background. Perform this function to avoid density unevenness.
Procedures
* Both the service technicians and the users can use steps (1) and (3).
* Only the service technicians can use step (2).
(1)
Press [BASIC] on the control panel and press [
After the adjustment is complete, make a copy and confirm the image quality. If uneven image density still
persists, have the service technicians perform the following procedure.
e-STUDIO5506AC/6506AC/7506AC (Ver01)
After adjustment
When the density is adjusted
manually, the density of the entire
copy image is even.
Before adjustment
] to lower the copy density manually.
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
2-81
2. Copier-specific Adjustments
Feeding
direction
Feeding
direction