Honeywell RCHT8610WF Product Data page 4

13 Set R-switch position and insert R-wire or wires
Set the R-switch up or down based on your wiring notes in Step 7.
Insert wires into the inner holes of the terminals on the UWP. The
tabs will stay down once the wire is inserted.
If you have 1 R-wire (R, Rh, or Rc)
1. Set
R-switch to
the up
position.
If you have 2 R-wires (R or Rh, and Rc)
1. Set
R-switch
to the down
position.
14 Connect remaining wires from
Step 8
Tip: Do not mount the UWP to the
wall prior to connecting the wires.
Depress the tabs to put the wires
into the inner holes of their corre-
sponding terminals on the UWP
(one wire per terminal) until it is
firmly in place.
Gently tug on the wires to verify
they are secure.
Tip: If you need to release the
wires again, push down the
terminal tabs on the sides of the
UWP.
15 Mount the UWP and close the
door
Mount the UWP using the
provided screws. Install all three
screws for a secure fit on your
wall. Close the door after you're
finished.
2. Insert your
R-wire (R, Rh
or Rc) into
R-terminal.
or
2. Insert your
Rc wire into
Rc-terminal.
3. Insert your
R or Rh
wire into
R-Terminal.
This wiring is just an example,
actual wiring may vary.
supplied
screws #8
16 Attach your thermostat
Align the thermostat onto the
UWP and firmly snap it into place.
17 Turn your power ON
Turn on the power at the breaker
box or switch that controls the
heating/ cooling system.
18 Return to the thermostat
Return to the thermostat. Confirm
the screen shows START SETUP.
If it does, continue to "Setup with
Honeywell Home App" below.
If your thermostat does not show
START SETUP, please contact
Resideo support.
Setup with Honeywell Home App
1 Start Setup with the app
Touch START SETUP on thermostat.
2 Select to setup with the app
Touch Yes on the USE APP screen.
3 Your thermostat is now ready to be configured using the
Honeywell Home app
a) Download the "Honeywell Home" app from the App store or
Google play.
b) Open the Honeywell Home app. Your thermostat should appear
under Thermostat Found. Tap SET UP NOW as shown below to
continue. If your thermostat doesn't appear, create an account
(if necessary), or sign in to your Honeywell Home account. Then
select the T5 Smart Thermostat to install.
c) The Honeywell Home app will walk you through the rest of setup.
A
Use 3x
1-1/2"
4
ON
Breaker box
ON
OFF
No
Back
C
B
Thermostat Found:
SET UP NOW
ON
o
90
ON
OFF
Switch
Yes